Loop Powered Temperature Transmitter TMP-218:
The Loop powered Temperature Transmitters TMP-218 are microprocessor based programmable transmitters which are used for recording of Temperature values.
- Highly accurate Digital technology sensor gives fast and reliable output.
- Temperature range is -40 to 100°C with accuracy of ±0.5°C.
- Long term stable output for Temperature.
- Digital Display of Temperature with its Unit.
- Standard 4-20 mA signal output with configurable range.
- Easy handling & programing with 3 keys for WP models.
- Non- intrusive programing for flameproof models using Magnetic Wand.
- Software calibration for Temperature.
- Compact size, can be easily installed.
Detection Method: Advance CMOS Sensor Technology.
Range/Resolution: For Temperature -40 to 100°C with 0.1 Resolution
Display: 2-Line, 4×2 LCD Display.
Control Action: Two independent Alarm set points with Latch & non-Latch facility.
Setting: By 3 keys on front panel for WP model By using magnetic wand for flameproof model
- Accuracy & Performance:-
Accuracy: ±0.5°C for Temperature
RTC: ± 60 seconds per month
Sampling Interval: 3 seconds
Supply voltage: 22 to 28 VDC; Typically 24VDC
Power consumption: Less than 0.6 Watts
Cable: 3 wires (1.5 mm²) flexible or armoured shielded cable.
- Output Signal:-
Standard: Loop 4-20mA current output with configurable range selection.
Load resistance: 680 ohm at 24 VDC
Operating Temp.: -15 to +55°C
CE certified 24 VDC power supply.
- Flameproof Housing:
Protection class: IP-66
Cabinet material: Cast aluminium alloy, LM-6
Cable entry: Double compression cable gland (EX-proof M20 X 1.5,½ “NPT &¾ “ ET-type
Dimension: 255mm(H) with sensor holder X 230mm(W) with stopper plug &Cable gland X 125 mm(D)
Mounting: Wall / Stand / Pipe
Weight: Approximately 2.53kg
- Weatherproof Housing:
Protection class: IP-65
Cabinet material: Polycarbonate ,Grey Colour
Cable entry: Thermoplastic cable gland (IP-68)
Dimension: 215mm(H) with sensor holder ×100 mm(W)with stopper plug & cable gland ×80 mm(D)
Mounting: Wall Mounting/ Stand Mounting
Weight: Approximately 300grams
- Clean Rooms
- Swimming Pool
- Hospitals/ Labs
- Enthalpy control
- Museums / Archives
- Refrigeration Control
- Indoor Air Quality ( IAQ )
- HAVC /Buildings Control
- Energy Management System (EMS)