Waste Water Treatment - Gas Monitoring Solution
Ambetronics plays a crucial role in wastewater treatment by providing state-of-the-art gas detection systems tailored to the specific needs of treatment facilities. With a range of detectors like the GT-2500-WP, GT-2511-WP, GT-1033-WP, GT-2500-FLP, GT-2511-FLP, and GT-5022-WP, Ambetronics ensures the safety and efficiency of key processes such as chlorination, ozonation, aeration, and chemical storage. By continuously monitoring gas levels, Ambetronics detectors enable prompt detection of potential leaks or malfunctions, allowing for timely interventions to prevent hazardous situations. This proactive approach not only safeguards the integrity of the treatment system but also protects the environment and public health. Through its innovative solutions, Ambetronics contributes significantly to the smooth operation and optimization of wastewater treatment processes worldwide.
In a waste water treatment facility, a CO2 gas detector like GT-2500-WP, GT-2511-WP, GT-1033-WP plays a critical role within the chlorination system. As chlorine gas is commonly used for disinfection purposes, the presence of CO2 gas can indicate potential leaks or malfunctions in the chlorination process. Since CO2 is often generated during the formation of hypochlorous acid, monitoring its levels ensures the efficiency and safety of the treatment process. Prompt detection of CO2 enables timely interventions to prevent hazardous situations, ensuring the integrity of the treatment system and safeguarding both the environment and public health.
LED Display Smart Gas Detector –
GT-2500-WP
- Fast and reliable detection of smallest leaks of toxic gases and volatile organic compounds (VOC)
- Highly resistant to poisoning and etching
- Capable of detecting down to PPM levels
- Provision for smart pluggable gas sensor modules for various gases including toxic and combustible gases.
- Optional STEL and TWA set points for toxic gases.
- Suitable for sewage plants and stack monitoring
- Weatherproof housing with IP-65 protection class
- Non-intrusive programming for easy maintenance in harsh environments
LCD Display Smart Gas Detector –
GT-2511-WP
- Detects smallest leaks of toxic gases and volatile organic compounds (VOC).
- Highly resistant to poisoning and etching.
- Capable of detecting down to PPM levels.
- Digital display of gas concentration for precise monitoring.
- Indication for sensor integrity and calibration status.
- Configurable alarm set points for immediate response to hazardous levels.
- Optional RS-485 communication for integration with monitoring systems.
- Weatherproof housing with IP-65 protection for reliable outdoor use.
Two Wire Loop Powered – GT-1033-WP
- Fast response time for immediate detection of harmful gases.
- Easy installation and operation for efficient monitoring in sewage plants.
- Industrial-standard output ensures compatibility with wastewater treatment systems.
- Reliable sensor technology for accurate gas concentration measurement.
- Weatherproof housing withstands harsh environmental conditions.
- Loop test functionality ensures continuous operation without calibration gas.
- Sensor open/over-range indication alerts operators to potential issues.
- User-friendly interface simplifies monitoring and maintenance tasks.
In waste water treatment, an O3 gas detector like GT-2500-FLP and GT-2511-FLP is indispensable for safe and effective Ozonation processes. Ozonation involves the use of ozone gas to oxidize and disinfect contaminants in water. Monitoring O3 levels ensures proper dosing and prevents overexposure to ozone, which can be harmful to both the environment and personnel. By continuously monitoring O3 concentrations, the detector enables precise control of the ozonation process, ensuring optimal treatment efficiency while minimizing risks to health and safety. Detection of ozone leaks or malfunctions allows for swift corrective action, maintaining the integrity and effectiveness of the waste water treatment system.
Smart Gas Detector – Gt-2500-FLP
- Fast and Reliable Output: Detects the smallest leak of toxic and combustible gases.
- Enclosure: IP66/IP68 protection class for durability.
- Hot Swappable Smart Sensor: Allows on-site replacement if required.
- Automatic Calibration: Alerts for easy maintenance.
- Non-Intrusive Programming: Simplifies setup using a magnetic wand.
- RS-485 Communication Port: Optional communication protocol for compatibility.
Smart Gas Detector – Gt-2511-FLP
- Provides a fast reliable output for detection a smallest leak of Oxygen,
Toxic, Combustible and Volatile Organic Compounds (VOC). - Provision for smart – Pluggable gas sensor module for Oxygen, Toxic,
Combustible, PID & NDIR sensors. - Calibration data, Alarm data, Offset data, Output current data is saved in
the particular sensor module, for easy maintenance & servicing. - Highly resistant to poisoning and etching.
- Capable of detecting down to PPM, %V/V, %LEL, mg/m3.
- 2-Line, 4-Digit 8 mm (H) Seven Segment LED Display & 8 LEDs to indicate
status of instrument
In the Aeration tank of a waste water treatment plant, NH3, H2S, and CH4 gas detectors like GT-2500-WP for Detecting NH3 and GT-5022-WP for Detecting H2S and CH4 Gas are indispensable tools for ensuring operational safety and efficiency. These detectors monitor the levels of ammonia, hydrogen sulfide, and methane gases, which can be produced during the biological treatment process. Detecting and controlling these gases is crucial for maintaining optimal conditions for microbial activity and preventing toxic or explosive environments. By promptly identifying any deviations in gas concentrations, the detectors enable operators to take necessary precautions, such as adjusting aeration rates or implementing ventilation measures, to mitigate potential hazards and ensure the effective treatment of waste water without compromising safety or environmental standards.
Ammonia Gas Detector – GT-2500-FLP
- Fast and reliable detection of smallest leaks of toxic gases and volatile organic compounds (VOC)
- Highly resistant to poisoning and etching
- Capable of detecting down to PPM levels
- Provision for smart pluggable gas sensor modules for various gases including toxic and combustible gases.
- Optional STEL and TWA set points for toxic gases.
- Suitable for sewage plants and stack monitoring
- Weatherproof housing with IP-65 protection class
- Non-intrusive programming for easy maintenance in harsh environments
Dual Channel Smart Gas Detector
- Dual gas concentration detection for oxygen and volatile organic compounds (VOCs).
- Highly resistant to poisoning and etching.
- Capable of detecting smallest leaks of toxic gases.
- Optional RS-485 communication for data monitoring.
- Calibration data stored in sensor module for easy maintenance.
- Quick response time of less than 15 seconds.
- Error monitoring for sensor break or over-range conditions.
- Weatherproof ABS plastic housing suitable for harsh environments.
In waste water treatment, H2S and CH4 gas detectors like GT-2500-WP are indispensable tools for monitoring the atmosphere within digester tanks. These tanks facilitate the anaerobic digestion process, where organic matter is broken down by microorganisms to produce biogas, primarily composed of methane (CH4) and hydrogen sulfide (H2S). Monitoring the levels of these gases is crucial for ensuring the safety of personnel working in and around the tanks. Detection of elevated concentrations of H2S and CH4 alerts operators to potential leaks or malfunctions, allowing for timely intervention to prevent hazards such as explosions or asphyxiation. By providing continuous monitoring, these detectors help maintain a safe working environment and ensure the efficient operation of waste water treatment facilities.
Dual Channel Smart Gas Detector
- Dual gas concentration detection for oxygen and volatile organic compounds (VOCs).
- Highly resistant to poisoning and etching.
- Capable of detecting smallest leaks of toxic gases.
- Optional RS-485 communication for data monitoring.
- Calibration data stored in sensor module for easy maintenance.
- Quick response time of less than 15 seconds.
- Error monitoring for sensor break or over-range conditions.
- Weatherproof ABS plastic housing suitable for harsh environments.
In waste water treatment, the presence of chlorine (Cl2), sulfur dioxide (SO2), and ammonia (NH3) gas detectors like GT-6022-FLP in chemical storage areas is critical for ensuring both worker safety and the integrity of the treatment process. These chemicals are commonly used for disinfection, pH adjustment, and odor control in water treatment plants. Monitoring their levels helps prevent accidental exposure to toxic gases, as well as potential leaks or spills that could endanger personnel and the surrounding environment. Timely detection of elevated concentrations of Cl2, SO2, and NH3 allows for swift corrective action to mitigate risks and maintain the effectiveness of waste water treatment operations, safeguarding public health and the environment.
Smart Gas Detector for Toxic, Combustible, Oxygen & VOC Gases
- Detects toxic gases present in waste water.
- Resistant to poisoning and etching in harsh environments.
- Provides fast and reliable detection of volatile organic compounds (VOCs).
- Offers configurable alarm set points for immediate action.
- Enables non-intrusive programming for easy maintenance.
- Optional RS-485 communication for data monitoring.
- Highly accurate output signals for precise control.
- Flameproof design ensures safety in hazardous areas.
