1. Dual Parameter Monitoring: Simultaneously displays temperature and humidity readings on a 7-segment LED display for comprehensive environmental assessment.
2. Independent Programmable Alarms: Allows users to set customized alarm limits for temperature and humidity, ensuring prompt notifications in case of deviations.
3. Integrated Buzzer with Acknowledgment: Built-in buzzer immediately signals violations of temperature or humidity limits, with acknowledgment capability for swift response.
4. Software Calibration: Temperature and Humidity Monitor Provides the flexibility to calibrate the device for precise and accurate temperature and humidity measurements.
5. Password Protected Programming: Three front keys with password protection enhance security during parameter programming, preventing unauthorized access.
6. RS-485 Communication: Utilizes isolated RS-485 communication with MODBUS RTU Protocol for seamless integration into existing systems.

Technical Specifications of Temperature and Humidity Monitor:
1. Input:
– Integrated Humidity and Temperature Sensor
2. Range & Resolution:
– Temperature: -20.0°C to 60°C, 0.1 Resolution
– Humidity: 0% to 100% RH, 0.1 Resolution
3. Accuracy:
– Temperature: ± 1°C
– Humidity: ± 2% RH
4. Indication:
– 2 Line 4 Digit Seven Segment 0.4” Red LED Display
– 2 LED Status Indicators for Alarms
– Integrated Buzzer for Audible Alarm Notification
5. Communication:
– Isolated RS-485 with MODBUS RTU Protocol
– Programmable Settings: Baud rate 9600 bps, Parity (O/E/N), Data bits (8), Stop bits(1/2)
– Slave ID: 1-250
– Minimum Polling Interval: 200 milliseconds
6. Programmable Parameters:
– Set Point: Programmable as per input selection
– 3 Front Keys for Parameter Programming
– User-Programmable Alarm Logic: High or Low
7. Environmental:
– Operating Ambient Temp.: 0 to 50°C
– Humidity: Below 95% RH, Non-condensing
8. Electrical:
– Supply Voltage: 24VDC ± 10%
– Power Consumption: Less than 1.2 watts at 24VDC
9. Dimensions:
– Flush Mounting Plate: SS-304
– Front Plate Size: 90 mm(H) x 110 mm(W)
– Back Enclosure: MS with Powder Coating
– Overall Dimension: 90mm(H) x 110 mm (W) x 43mm(D)
– Mounting: Modular wall mounting with Stainless Steel Front